Alpha Blend Pots
Our unique linear-taper pots control the signal mix from two pickups or sources, panning from one source to another. Each has a center detent to make easy adjustments on the fly.
250K vs. 500K
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off (attenuates) some of the high frequencies to ground.
|
||
Shaft diameter | 6mm split shaft, coarse knurling | |
|
||
Thread | M7 x 0.75 | |
|
||
Threaded portion | 3/8" | (9.52mm) |
|
||
Required mounting hole diameter | 9/32" | (7.14mm) |
|
||
Flat washer and two mounting nuts included | ||
|
To see the knobs available for these pots, click here.