Plastic Mounting Rings For Humbucking Pickups
Traditional plastic mounting rings for Gibson® humbuckers. Purchase pickup height and mounting ring screws separately. Mounting rings sold individually.
|
|
|
| Outside dimension | 3-17/32" x 1-25/32" (89.69mm x 45.24mm) |
|
|
|
| Inside dimension | 2-3/4" x 1-1/2" (69.85mm x 38.10mm) |
|
|
|
| Low taper | 3/16" to 1/4" (4.76mm to 6.35mm) For use at the neck position on instruments with a Gibson® bridge, and can be used at the neck and bridge positions with a Fender bridge. |
|
|
|
| Tall taper | 3/8" to 7/16" (9.53mm to 11.11mm) For use at the bridge position on instruments with a Gibson® bridge, and are too tall for Fender bridges. |
|
|
|
Each mounting ring has a flat (non-arched) bottom, and must be trimmed or sanded to match an arched guitar top. Sold individually.
Color-matching Cream Parts and Bindings
There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.
There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.
