ColorTone Liquid Pigments for Waterbase Lacquer

ColorTone Waterbase Pigments are concentrated pigmented colors designed for use with waterbase finishes only. Mix this product with clear filler, clear sealer, and clear finishes to create opaque custom products. Two or more colors can be combined to make a variety of shades.

Directions: Stir well before use. Mix up to 10% of pigment into clear waterbase finish (lacquer) until the desired strength of color is reached. Stir until color is completely mixed before use.

Notes: Do not used thinned pigments alone as a paint or stain. lf flip-top cap clogs, clean with a toothpick or soak in hot water to clear the tube. Product is non-flammable.

Wear protective gloves when handling and wear respirator if spraying.

Warning! Harmful if swallowed. Causes respiratory, eye and skin irritation.

Keep out of reach of children.

Caution: This product contains glycol ether and amine surfactant. May cause gastrointestinal irritation, nausea, vomiting or diarrhea if swallowed. May also affect central nervous system. This product can also be irritating to eyes and skin. Wear protective gloves when handling and wear respirator if spraying. Wash hands thoroughly after use.

Contains: Glycol ether and amine surfactant.

Warning: Contains chemicals known to the State of California to cause cancer.

First-aid: If swallowed, do not induce vomiting. Give 8-10 ounces of water to dilute material in stomach, but never give water to an unconscious person. Seek immediate medical attention. For eye contact rinse with flowing water for at least 15 minutes and seek medical aid. For skin contact, wash material off immediately. If skin irritation persists, contact a physician.